How to use Boundary Strip
Boundary strip aims to set blocked-off areas , Robot will recognize the Boundary Strip and will not go cross strip to enter the blocked-off areas.
Blocked-Off areas is listed as below:
A.Some furniture spaces between 2.5in/65mm--3.5in/90mm(Robot thickness is 3in/76 mm) to prevent robot from getting stuck, like sofa or cabinet.
B.Some place don't want robot to clean, like pet food bowls, kids toy, kitchen or bathing room
Once identify Blocked-Off areas, please do as blow:
1.Identify the area or item you do not want Robot to get close to.
2.If necessary, use scissors to cut the Boundary Strip to a shorter length. Be sure to correctly measure the length before cutting.
3. Used supplied adhesive tape to paste the Boundary Strip flat on the floor, make sure the strip is placed FLAT on the floor or under an rug area.
4. When don't want to robot mopping on the carpets, could put Boundary Strip under Carpets to stop the robot from entering the carpet.Notes: 1. Make sure the strip is affixed on the same surface level as the robot.
2. Be careful not to damage the floor when using adhesive tape.
3. Keep the Boundary Strip away from objects that emit excessive heat.
Model：G6000/G7000/G8000PRO/G8000
— THE END —
Disclaimer: This article expresses the will of the release at the time, and if there is any misunderstanding, the final interpretation right belongs to Tikom.
