1. Take out the dust bin and water tank from the robot.

2. Open the rubber cover of the water inlet and empty any remaining water from the water tank.

3. Press the release button on the dust bin cover to open the dust bin and empty the dust into a trash bin.

4. Open the pre-filter to remove the pre-filter, sponge, and HEPA filter from the filter compartment on the dust bin cover.

5. Clean the HEPA Filter using the provided cleaning brush.

Notes: Do not wash the HEPA filter with water.

6. Rinse the pre-filter, sponge, and dust bin with clean water, without using any detergent.

7. Dry the pre-filter, sponge, and dust bin thoroughly before using them.

8. Reinstall the HEPA filter, sponge, and pre-filter into the filter compartment, then place the dust bin back into the robot.

Notes:

1.The filters effectively prevent dust and dirt from entering the inside of the robot, which will protect its ventilation system and avoid secondary air pollution.

2.You can wash Dust Bin & Water Tank, Pre-filter and Sponge with Clean water. Be sure to air-dry them thoroughly before reassembling.

3.Do not wash the HEPA Filter with water, as it may damage the HEPA Filter and reduce the suction power.

Model: L8000