You can use supplied Cable Ties to organize your wires and power cords.

2. Before using the robot on a rug with tasseled edges, please fold the rug edges under.

3. Keep robot away from wet areas, such as kitchen or bathing room.Robot would be damaged by water.

4. The round bases of certain bar chairs, pedestal tables, pedestal fans, and floor lamps can affect the robot's mapping and navigation. 

    Therefore, during robot cleaning, please remove these items with round bases, or set this area as a "NO-GO Zone" or apply a "Virtual Wall" using the Tuya Smart app.

5. Keep the robot away from spaces between 3.15 inches/80mm and 4.33 inches/110mm (the robot's thickness is 3.66 inches/93mm) to prevent it from getting stuck, such as between the sofa, cabinet, or other furniture. 

    Please set this area as a "NO-GO Zone" or apply a "Virtual Wall" using the Tuya Smart app.

6. The anti-drop sensors will generally prevent the robot from tumbling down stairs and steep drops. 

    However, they may be less effective if they are dirty or used on carpeted, reflective, or very dark-colored floors. 

    It is recommended to place a secure physical barrier to block off areas where the anti-drop sensors are less effective as described above.

7. During the first use, make sure each room door is open to help Robot fully explore your house.

8. Because the robot can traverse a maximum threshold of 0.7 inches (>18mm), if the outer threshold of a room is less than 0.7 inches (<18mm) but the inner threshold is higher than 0.7 inches (>18mm), the robot could enter this room but might not be able to exit, potentially becoming trapped and unable to complete mapping and future cleaning work. 

    Therefore, please ensure to close the door of this room when the robot is mapping the whole house, and set a "No-Go Zone" or "Virtual Wall" for this room.

9. The robot may not operate on certain darker black-colored surfaces because the anti-drop sensors, which recognize an edge or a stair, may perceive the black color as an edge, causing the robot to avoid cleaning over it.

10. Avoid cleaning high-pile rugs thicker than 0.78 in/20 mm, as they may cause Robot to malfunction.

11. While your robot is cleaning, do not pick it up and move it, or move the charging station this could impact the robot's ability to map your home or back to charging station.

12. Please don’t put any toy or other things near Laser Distance Sensor (LDS), these would block laser signal and influence Robot navigation.

Model: L8000