1. Take out the Dust Bin and Water Tank from the Robot.

5. Gently tap the HEPA filter to remove any dust that has accumulated on it.
Note：Do notNotes:
1. The filters effectively block dust and dirt from entering the robot's interior, protecting its ventilation system and preventing secondary air pollution.
2. You can rinse the dust bin and water tank with clean water, but make sure they are fully air-dried before reassembling.
3. Avoid rinsing the HEPA filter with water, as it may damage the filter and reduce suction performance. wash the HEPA filter with water.

2. Press the release button on the dustbin cover to open it and empty the dust into a trash bin.

3. Lift the rubber cover of the water inlet and drain any remaining water from the tank.

4. Lift the filter cover on the dust bin and take out the HEPA filter.

5. Gently tap the HEPA filter to remove any dust that has accumulated on it.
Note：Do not wash the HEPA filter with water.

6. Rinse the dust bin with clean water without using any detergent.

7. Dry the dust bin thoroughly before using them.

8. Reinsert the HEPA filter into the filter compartment and place the dust bin back into the robot.

Notes:
1. The filters effectively block dust and dirt from entering the robot's interior, protecting its ventilation system and preventing secondary air pollution.
2. You can rinse the dust bin and water tank with clean water, but make sure they are fully air-dried before reassembling.
3. Avoid rinsing the HEPA filter with water, as it may damage the filter and reduce suction performance.

Model: G8000 Max