How to Clean Dust Bin, Filter and Water Tank [L8000 Plus&L8000 Pro]
1. Take out the Dust Bin and Water Tank from the Robot.
2. Open the rubber cover of the Water Inlet and empty any remaining water from the water tank.
3. Press the Release Button on the Dust Bin Cover to open the Dust Bin and empty the dust into a trash bin.
4. Open the filter cover of the dust bin, then remove the HEPA filter.
5. Gently tap the HEPA filter to remove any dust that has accumulated on it.
Note: Do not wash the HEPA filter with water.
6. Rinse the dust bin with clean water, without using any detergent.
7. Dry the dust bin thoroughly before using them.
8. Reinstall the HEPA Filter into the Filter Compartment, then place the dust bin back into the robot.
Model: L8000 Plus / L8000 Pro
— THE END —
Disclaimer: This article expresses the will of the release at the time, and if there is any misunderstanding, the final interpretation right belongs to Tikom.
